What to measure in your garage before you plan an ADU

Ten minutes with a tape measure saves weeks of redesign. These are the numbers that decide which layout fits.

November 18, 2026 · 5 min read

Most garage conversions start with a two-car garage of about 20 by 20 feet; many Calabasas homes have three-car garages, which open up more layouts. Measure before you choose one.

1. Inside width and depth

Wall to wall at floor level. Depth decides whether a bedroom, laundry and full kitchen run fit along one wall.

2. Ceiling height

Slab to the underside of the joists or rafters at the lowest point. Habitable rooms need at least 7 feet under the California Residential Code (R305).

3. The garage door opening

Width and distance from each side wall. It becomes a new wall with a window or the entry door.

4. Walls shared with the house

Mark them and any door between garage and house.

5. Existing windows and doors

Which wall, distance from the corner, width.

6. Distance to the property line and oaks

Measure to the side and rear lot lines, and note any oak trees nearby; work in an oak's protected zone needs a City permit.

7. Panel, water heater and cleanout

Photograph them: they tell a designer how much power is available and how the new bathroom will drain.

Put the numbers to work. The MyADUPlan builder asks for each measurement and draws a floor plan from your numbers.

Plan first, then permit

See what fits your Calabasas garage or yard.

Measure the space, pick a layout and get a preliminary floor plan, concept photo and one-sheet in a few minutes. Free, no obligation.

Garage conversions, JADUs and backyard ADUs. Start with the space you have; refine it any time.

Start My Free ADU Plan